DtiCorp.com

FIREYE PPC4000 Burner Control

Mon, 25 Feb 2013 15:35:48 -0700

]]>

FIREYE PPC4000 Parallel Positioning System With BURNERLOGIX Flame Safeguard Burner Management. The newest member of the Nexus family of products is the PPC4000. The PPC4000 is an electronic parallel positioning and O2 trim combustion control system. This controller will support sequencing/lead lag and up to 10 servo motors.

The PPC4000 is an electronic parallel positioning and O2 trim combustion control system built into a compact, flexible user configurable package. PPC4000 supports up to 10 servomotors.

When combined with a Fireye flame safeguard system such as the Fireye BurnerLogix control, the PPC4000 offers the most compact and advanced parallel positioning system available.

Features:

NEXUS CONTROLLER - PPC4000.

Precise control of burner air/fuel ratio via independent motors (Parallel Positioning).

Up to 4 servo channels for positioning motors directly powered from the controller. (10 servo motors using external power supply).

Temperature or pressure control optimized burner firing rate control via PID control loop. Sequencing/lead lag control available.

Simplified wiring via removable plug connectors.

Operating & logged data stored on SD card. User programmable digital inputs.
]]>

FIREYE 45UVFS1-1000

Wed, 06 Feb 2013 15:16:30 -0700

]]>

FIREYE 45UVFS1-1000
]]>

Honeywell Iris P520 Signal Processor

Mon, 04 Feb 2013 17:14:53 -0700

]]>

Honeywell Iris P520 Signal Processor.
]]>

Honeywell Iris S550BE-PF Viewing Head For Flame Monitor

Mon, 04 Feb 2013 17:11:55 -0700

]]>

Honeywell Iris S550BE-PF Viewing Head For Flame Monitor. The S55xxx viewing head delivers flame discrimination in the toughest environments and is capable to detect the flame of almost every available fuel type or fuel mixture. With automatic setup, three channels and the ability to monitor UV and IR flame components simultaneously or separately, the P532 signal processor offers improved burner up time and reliability. Industrial process burners, multiple burner systems, incinerators, ovens, kilns, etc.

Features

Approvals: CE approved according EN298 for continuous operation.

GOST, FM, UL, CSA & NRTL/C Approved

IECEx certification for specific models (global)

ATEX certification for specific models (Europe)

Protection class: NEMA 4x, IP64

S55xBE: Zone 2 Class 1 Div 2 Group A, B, C and D

S55xBE: IECEX Cat 3 (Zone 2) II 3G IIC T5

S55xBE-EX: ATEX {EX} II 2 G Ex d IIC T6 for use in Zone 1 and 2

Ambient temperature: -40...70C

Maximum humidity: 85%rh

Sensor: UV Tube, Solid State IR sensor or both UV+IR

Response UV: 200 nm Peak / IR: 1400 nm Peak

Technology: Pulse Count (UV) and Flicker (IR)

Self-check: Electronic (no mechanical moving parts)

Works in combination with P522, P531, or P532 signal processors.

Note: All Sxxx / Pxxx series Flame Safety Products are approved by FM Global for use in SIL 3 environment.

All S5xx viewing heads are immune to X-Rays and Gamma radiation, making them ideal for a broad variety of industrial applications. Other than any other flame scanner, the S55xB(E) viewing heads perform background pulse counting for tube health and therefore don't need a mechanical shutter system for self-checking.

Operation: Cont.
]]>

Honeywell Iris 700ACSP Signal Processor

Mon, 04 Feb 2013 17:08:47 -0700

]]>

Honeywell Iris 700ACSP Signal Processor.
]]>

Honeywell IRIS Watchdog III UV Flare Stack Pilot Monitor

Mon, 04 Feb 2013 17:02:50 -0700

]]>

Honeywell IRIS Watchdog III UV Flare Stack Pilot Monitor. The IRIS Watchdog III UV Flare Stack Pilot Monitor is an effective replacement or supplement to thermocouples or optical IR systems. It can be connected to an existing ignition system making the replacement of burned out thermocouples effortless. This can be done without plant shut down or flare interruption, saving you valuable time and money.

The IRIS Watchdog electro-optically monitors pilot and flare stack activity using an ultraviolet sensor. It provides continuous burner surveillance indicating the presence or absence of a flame at the flame tip. The Ultraviolet sensor is not affected by sunlight and therefore provides reliable flame sensing under a wide range of atmospheric conditions.

S256B VIEWING HEAD:

The model S256B viewing head is ground mounted up to 1000 feet from the flare stack tip. The rugged, light weight, all weather aluminum mounting yoke is designed for easy and accurate adjustment of the viewing head. Both vertical and horizontal aiming can be performed, and securely locked once achieved. Signal strength can be monitored and adjusted at the viewing head location by using the display on the rear of the viewing head. The electronics are designed with no moving parts to ensure continuous and maintenance-free operation.

P222 SIGNAL PROCESSOR:

Based upon our flagship flame monitoring system, the IRIS model P522, the model P222 signal processor uses advanced microprocessor technology for detection and monitoring of Flare Stacks. All setup functions and status displays are available from the front panel. The P222 can be powered from 85 to 264 VAC line voltage, or from a DC supply of 22 to 26VDC. Two independent relays are provided, one giving an early response (adjustable between one and sixty seconds) to a "flame loss" and the other giving a time-delayed response, (adjustable between the early response time and 60 minutes), for a "flame-out" alarm. The P222 is also compatible with FlameTools software for remote setup and monitoring from a desktop computer system, or a handheld PDA.
]]>

Honeywell Iris S806 Viewing Head For Flame Monitor

Mon, 04 Feb 2013 16:54:05 -0700

]]>

Honeywell Iris S806 Viewing Head For Flame Monitor.
]]>

Honeywell Iris S702HF Viewing Head For Flame Monitor

Mon, 04 Feb 2013 16:51:08 -0700

]]>

Honeywell Iris S702HF Viewing Head For Flame Monitor.
]]>

Honeywell Iris S702PF Viewing Head For Flame Monitor

Mon, 04 Feb 2013 16:48:22 -0700

]]>

Honeywell Iris S702PF Viewing Head For Flame Monitor.
]]>

Honeywell Iris S556BE-PF Viewing Head For Flame Monitor

Mon, 04 Feb 2013 16:42:19 -0700

]]>

Honeywell Iris S556BE-PF Viewing Head For Flame Monitor. The S55xxx viewing head delivers flame discrimination in the toughest environments and is capable to detect the flame of almost every available fuel type or fuel mixture. With automatic setup, three channels and the ability to monitor UV and IR flame components simultaneously or separately, the P532 signal processor offers improved burner up time and reliability. Industrial process burners, multiple burner systems, incinerators, ovens, kilns, etc.

Features

Approvals: CE approved according EN298 for continuous operation.

GOST, FM, UL, CSA & NRTL/C Approved

IECEx certification for specific models (global)

ATEX certification for specific models (Europe)

Protection class: NEMA 4x, IP64

S55xBE: Zone 2 Class 1 Div 2 Group A, B, C and D

S55xBE: IECEX Cat 3 (Zone 2) II 3G IIC T5

S55xBE-EX: ATEX {EX} II 2 G Ex d IIC T6 for use in Zone 1 and 2

Ambient temperature: -40...70C

Maximum humidity: 85%rh

Sensor: UV Tube, Solid State IR sensor or both UV+IR

Response UV: 200 nm Peak / IR: 1400 nm Peak

Technology: Pulse Count (UV) and Flicker (IR)

Self-check: Electronic (no mechanical moving parts)

Works in combination with P522, P531, or P532 signal processors.

Note: All Sxxx / Pxxx series Flame Safety Products are approved by FM Global for use in SIL 3 environment.

Operation: Cont.
]]>

Honeywell Iris P531DC Signal Processor

Mon, 04 Feb 2013 16:36:40 -0700

]]>

Honeywell Iris P531DC Signal Processor.
]]>

Honeywell Iris P532AC Signal Processor

Mon, 04 Feb 2013 16:34:14 -0700

]]>

Honeywell Iris P532AC Signal Processor.
]]>

Honeywell Iris P522AC Signal Processor

Mon, 04 Feb 2013 16:31:19 -0700

]]>

Honeywell Iris P522AC Signal Processor.
]]>

Honeywell Iris P532UI Signal Processor

Mon, 04 Feb 2013 16:28:26 -0700

]]>

Honeywell Iris P532UI Signal Processor.
]]>

Honeywell Iris 700DCSP Signal Processor

Mon, 04 Feb 2013 16:24:46 -0700

]]>

Honeywell Iris 700DCSP Signal Processor.
]]>

Honeywell S511 Iris Viewing Head For Flame Monitor

Mon, 04 Feb 2013 16:20:13 -0700

]]>

Honeywell S511 Iris Viewing Head For Flame Monitor. The S55xxx viewing head delivers flame discrimination in the toughest environments and is capable to detect the flame of almost every available fuel type or fuel mixture. With automatic setup, three channels and the ability to monitor UV and IR flame components simultaneously or separately, the P532 signal processor offers improved burner up time and reliability. Industrial process burners, multiple burner systems, incinerators, ovens, kilns, etc.

Features

Approvals: CE approved according EN298 for continuous operation.

GOST, FM, UL, CSA & NRTL/C Approved

IECEx certification for specific models (global)

ATEX certification for specific models (Europe)

Protection class: NEMA 4x, IP64

S55xBE: Zone 2 Class 1 Div 2 Group A, B, C and D

S55xBE: IECEX Cat 3 (Zone 2) II 3G IIC T5

S55xBE-EX: ATEX {EX} II 2 G Ex d IIC T6 for use in Zone 1 and 2

Ambient temperature: -40...70C

Maximum humidity: 85%rh

Sensor: UV Tube, Solid State IR sensor or both UV+IR

Response UV: 200 nm Peak / IR: 1400 nm Peak

Technology: Pulse Count (UV) and Flicker (IR)

Self-check: Electronic (no mechanical moving parts)

Works in combination with P522, P531, or P532 signal processors.

Note: All Sxxx / Pxxx series Flame Safety Products are approved by FM Global for use in SIL 3 environment.

Operation: Cont.
]]>

Honeywell IRIS P222 Flare Stack Signal Processor - AC Power

Mon, 04 Feb 2013 16:12:44 -0700

]]>

Honeywell IRIS P222 Flare Stack Signal Processor - AC Power. The Honeywell IRIS Watchdog III system monitors pilot and flare stack activity using an ultraviolet sensor. It provides continuous burner surveillance indicating the presence or absence of a flame at the flame tip. The RP222A signal processor includes two independent relays, one for early response (adjustable from 1-60 seconds) to a flame loss, and the other for time-delayed response (adjustable between the early response time and 60 minutes) for a flame-out alarm. The signal processor can be AC or DC powered, and is designed for use with the Honeywell IRIS CS256 ultraviolet viewing head.

Features:

Signal processor for UV flare stack monitoring, with mounting base, plug-in terminals, four-digit alphanumeric display, keypad, and status LEDs

One channel input specifically for flare stack pilot monitoring

Outputs: 0/4-20 mA scalable, two SPDT early indication, one SPDT delayed indication, power to detector

Compatible viewing head: One S256 ultraviolet flare stack viewing head with digital display

Replaces Honeywell part number RP222A1006
]]>

Honeywell IRIS S256B Watchdog III UV Flare Stack Viewing Head

Mon, 04 Feb 2013 16:07:09 -0700

]]>

Honeywell IRIS S256B Watchdog III UV Flare Stack Viewing Head. The Honeywell IRIS CS256 ultraviolet viewing head is paired with the RP222A watchdog flare stack monitor. It has a rugged, light-weight, all-weather yoke for ground-mounting up to 1000 feet from the flare stack tip. It can be aimed vertically and horizontally, and locked securely once it's adjusted to provide the optimal signal strength. The electronics are designed with no moving parts, to ensure continuous maintenance-free operation.

Features:

Ultraviolet viewing head for flare stack pilot monitoring, digital display, quick disconnect plug, and 0-99 gain selection

IP67, NEMA 4X enclosure with CSA special acceptance approval

Designed specifically for use with RP222A Watchdog III flare stack monitoring signal processor

Replaces Honeywell part number CS256B1017
]]>

Honeywell S552B Iris Viewing Head For Flame Monitor

Mon, 04 Feb 2013 15:51:48 -0700

]]>

Honeywell S552B Iris Viewing Head For Flame Monitor. The S55xxx viewing head delivers flame discrimination in the toughest environments and is capable to detect the flame of almost every available fuel type or fuel mixture. With automatic setup, three channels and the ability to monitor UV and IR flame components simultaneously or separately, the P532 signal processor offers improved burner up time and reliability. Industrial process burners, multiple burner systems, incinerators, ovens, kilns, etc.

Features

Approvals: CE approved according EN298 for continuous operation.

GOST, FM, UL, CSA & NRTL/C Approved

IECEx certification for specific models (global)

ATEX certification for specific models (Europe)

Protection class: NEMA 4x, IP64

S55xBE: Zone 2 Class 1 Div 2 Group A, B, C and D

S55xBE: IECEX Cat 3 (Zone 2) II 3G IIC T5

S55xBE-EX: ATEX {EX} II 2 G Ex d IIC T6 for use in Zone 1 and 2

Ambient temperature: -40...70C

Maximum humidity: 85%rh

Sensor: UV Tube, Solid State IR sensor or both UV+IR

Response UV: 200 nm Peak / IR: 1400 nm Peak

Technology: Pulse Count (UV) and Flicker (IR)

Self-check: Electronic (no mechanical moving parts)

Works in combination with P522, P531, or P532 signal processors.

Note: All Sxxx / Pxxx series Flame Safety Products are approved by FM Global for use in SIL 3 environment.

Operation: Cont.
]]>

Honeywell S552BE-PF Iris Viewing Head For Flame Monitor

Mon, 04 Feb 2013 15:48:48 -0700

]]>

Honeywell S552BE-PF Iris Viewing Head For Flame Monitor. The S55xxx viewing head delivers flame discrimination in the toughest environments and is capable to detect the flame of almost every available fuel type or fuel mixture. With automatic setup, three channels and the ability to monitor UV and IR flame components simultaneously or separately, the P532 signal processor offers improved burner up time and reliability. Industrial process burners, multiple burner systems, incinerators, ovens, kilns, etc.

Features

Approvals: CE approved according EN298 for continuous operation.

GOST, FM, UL, CSA & NRTL/C Approved

IECEx certification for specific models (global)

ATEX certification for specific models (Europe)

Protection class: NEMA 4x, IP64

S55xBE: Zone 2 Class 1 Div 2 Group A, B, C and D

S55xBE: IECEX Cat 3 (Zone 2) II 3G IIC T5

S55xBE-EX: ATEX {EX} II 2 G Ex d IIC T6 for use in Zone 1 and 2

Ambient temperature: -40...70C

Maximum humidity: 85%rh

Sensor: UV Tube, Solid State IR sensor or both UV+IR

Response UV: 200 nm Peak / IR: 1400 nm Peak

Technology: Pulse Count (UV) and Flicker (IR)

Self-check: Electronic (no mechanical moving parts)

Works in combination with P522, P531, or P532 signal processors.

Note: All Sxxx / Pxxx series Flame Safety Products are approved by FM Global for use in SIL 3 environment.

Operation: Cont.
]]>