 HONEYWELL M6194D1017 24V Non-Spring Return Foot Mounted Actuator with 300 lb-in. torque. Series 61 Modutrol IV Motors non-spring return floating control motors used with controllers that provide a switched spdt or floating output to operate dampers or valves.
Features Replace M644-A-E motors.
Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.
Motor and circuitry operate from 24 Vac.
Quick-connect terminals are standard--screw terminal adapter is available.
Adapter bracket for matching shaft height of older motors is available.
Motors have field adjustable stroke (90 to 160 degrees).
Integral auxiliary switches are available factory mounted, or can be field added.
All models have dual shafts (slotted and tapped on both ends).
All models have auxiliary switch cams.
Fixed torque throughout the entire voltage range.
Motors are designed for either normally open or normally closed valves and dampers.
Features
Description: Modutrol IV Motor
Application Type: Electric
Internal Auxiliary Switch: 0
Fail Safe Mode: Non-Spring Return
Control Signal: Floating
Feedback: No
Motor shaft: Dual-ended shaft
Stroke - Adjustable; 90 to 160 degrees, Symmetrical
Torque Rating (lb-in.): 300 lb-in.
Torque Rating (Nm): 34 Nm
External Auxiliary Switches Available: Yes
Voltage: 24V
Frequency: 50 Hz
Frequency: 60 Hz
Power Consumption Driving (VA): 15 VA
Electrical Connections: Quick-connect terminals
Shaft Dimensions (in.): 0.375 in.
Shaft Dimensions (mm): 10 mm
Shaft Shape: square
Mounting: Foot-mounted
Weight (lb): 6.5 lb
Dimensions (in.): 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deep
Dimensions (mm): 164 mm high x 140 mm wide x 185 mm deep
Temperature Range, Ambient (F): -40 F to +150 F
Temperature Range, Ambient (C): -40 C to +60 C
Deadweight Load on Shaft (Either End) (lb): 200 lbs.
Deadweight Load (Combined on both Shafts): 300 lbs.
Nominal Timing (sec): 120-240 sec
Shaft Rotation (upon control signal increase): Dependent on wiring (normally closed)
Auxiliary Switch Ratings AFL - 120 Vac: 7.2A
Auxiliary Switch Ratings AFL - 240 Vac: 3.6A
Auxiliary Switch Ratings ALR- 120 Vac: 43.2A
Auxiliary Switch Ratings ALR- 240 Vac: 21.6A
Approvals, Underwriters Laboratories Inc - Listed: File No. E4436, Guide No. XAPX for USA and Canada
Approvals, CE - EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
|