HONEYWELL C7961F1004 120 Vac Dynamic Self-checking Ultraviolet Flame Detector. A self-checking electronic flame detector using a solid state UV sensor to detect ultraviolet radiation in flames for supervision of gas, oil or combination gas-oil burners.

Features

• Designed for use with 7800 series controls with the R7851C flame amp.

• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the UV sensor tube checking function.

• Can be mounted horizontally, vertically or at any angle in between.

• The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.

• Treaded conduit fitting and color-coded leadwires allow rapid electrical installation.

• Incorporates UV sensor tube checking feature; used with R7851C1008 Dynamic Self-check Amplifiers.

• Protective heat block built into mounting flange.

• -40 F (-40 C) rated ultraviolet sensing tube is supplied.

• C7961E1022 or E1030 5 pin Brad Harrison type (formally 41307N)mating connector not supplied nor available through Honeywell.