Honeywell C7061F1003, 120/230 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking, Explosion Proof. Dynamic self-checking flame detector used with R7861 Dynamic Self-check Amplifiers for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.

Features

• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the UV sensor tube checking function.

• Can be mounted horizontally, vertically or at any angle in between.

• The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.

• Field replaceable ultraviolet sensing tube and quartz viewing window.

• Models with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.

• C7061A1038 or A1046 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.

• Two detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.

• Protective heat block built into mounting flange.

• -40 F (-40 C) rated ultraviolet sensing tube is supplied.

• C7061E meets NEMA 4 standards with viewing window rated to 20 psi.

• C7061F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Product Specifications

• Description: Ultraviolet Flame Detector with shutter

• Type: Ultraviolet, Purple Peeper, Self-Checking

• Application: Gas fired burners

• Application: Oil fired burners

• NEMA Rating: Explosion Proof

• Electrical Connections: Terminal block

• Ambient Temperature Range (F): -40 F to +175 F

• Ambient Temperature Range (F): -40F to +160F

• Ambient Temperature Range (C): -40C to +70C

• Ambient Temperature Range (C): -40 C to +79 C

• Mounting: 1 in. NPT

• Electrical Ratings: 120 or 230 Vac

• Frequency: 50 Hz

• Frequency: 60 Hz

• Weight (lb): 13.9 lb

• Weight (kg): 6.3 kg

• Approvals, Others: CE & conforms to EEXD IIc

• Comments: Dynamic self-checking flame detector

• Used With: Flame Amplifiers: R7861